Tutorial - Batom com Glitter/ 3D

By | 07:30

1. Prime
1. Before starting the design, prepare the lips by using a lip balm and letting that soak in for a while. Then apply a lip primer and let it set for a couple of minutes.
2. Outline
2. Line around your lips with a white lip or eye pencil. Don't worry about being perfect yet, just get a rough guide going.
3. Fill in your lips
3. Then fill in the centre of the lips with a black lip liner. I used an eyeliner again because I don't have a lip pencil in that colour.
4. Fill in and highlight
4. Apply your lip tar or black lipstick over the black liner with a lip brush or small brush with a defined edge. Add a highlight to your cupid's bow with a grey toned silver eye shadow and also apply to the centre of your bottom lip.
5. Add the GLITTER!
5. Use a small brush to apply a glitter adhesive to your lips over the black area. Make sure the adhesive is lip safe or at least non toxic. You can also use a clear lip gloss or Vaseline. Use the same brush to pat the glitter on top of the adhesive, trying to keep inside the black area.
6. Complete the outline
6. Mix up the silver pigment with a mixing medium or water and using an angled brush apply it around your lips over the white liner. Pat the silver pigment dry on top of the liner and dab the brush between the border of the glitter and the liner to make sure you've filled in all the spaces.
You have now accomplished your desired look. Go show it off :)

Postagem mais recente Postagem mais antiga Página inicial